search:

Products | Services

Bio & Chemical Sensors
     BioSentry™

Laser Products
     BriteLight™
     Custom CW Lasers

DP-LIBS


 Laser Products - CW
JMAR’s Nd: YAG CW Diode Pumped Solid State laser development is the result of many years of research and development. JMAR’s design technique allows for the creation of a variety of configurations. Some of the key advantages of JMAR’s lasers are:

  • High Brightness
  • High Beam Quality (less than 5x DL)
  • Short Pulse Duration (as low as 1ns)
  • High Repetition Rate (up to 5kHz)
  • Building Block Architecture Provides      Multiple Design Options

  • JMAR’s dual head CW DPSS laser

    Listed below is a summary of JMAR’s laser building blocks that can be combined to form custom lasers for specific applications inclusive of sources for EUV lithography.

    1) Single small head oscillator: 120W transversely pumping a 3mm rod
    Free running
    Power 30W
    Beam quality 5 * xDL

    2) Two small heads oscillator: Dual 120W transversely pumping 3mm rods
    Free running AO/EO Q-switch Cavity dumped Short pulse
    Energy/pulse 50W (CW) 3 * mJ/3 * mJ 0.2 – 0.6mJ 0.5mJ
    Rep. Rate CW 5000Hz 5000Hz 5000Hz
    Pulse duration CW 100 * ns/20 * ns 3-7ns 1ns
    Beam quality 5 * xDL 3 * xDL <1.2xDL <1.2xDL

    3) Single small head oscillator: 240W transversely pumping a 3mm rod
    Free running
    Power 60W
    Beam quality 7 * xDL

    4) Two small heads oscillator: Dual 240W transversely pumping 3mm rods
    Free running AO/EO Q-switch Cavity dumped Short pulse
    Energy/pulse 100W (CW) 6 * mJ/6 * mJ 0.4 * – 1.2 * mJ 1 * mJ
    Rep. Rate CW 5000Hz 5000Hz 5000Hz
    Pulse duration CW 100 * ns/20 * ns 3-7ns 1ns
    Beam quality 5 * xDL 3 * xDL <1.2xDL <1.2xDL

    5) Single head oscillator: 1250W arrays transversely pumping an 8mm rod
    Free running
    Power 440W
    Beam quality 20 * xDL

    6) Two heads oscillator: Dual 1250W arrays transversely pumping 8mm rods
    Free running Q-switch
    Energy/pulse 850W (CW) 85 * mJ
    Rep. Rate CW 5000Hz
    Pulse duration CW 100 * ns
    Beam quality 10 * xDL 5 * xDL

    7) Dual heads amplifier: Two 5000W arrays transversely pumping 8mm rods
    Extracted Energy/pulse 75mJ (max.)
    Rep. Rate 5000Hz
    Single pass gain 2
    Beam quality <2xDL

    The above lasers can also be arranged in various configurations to obtain the desired laser system specifications.

    Note: * indicates speculative value

    Home  |  About JMAR  |  Products & Services  |  Technical Info  |  Investors  |  Careers  |  Contact